Performance Series
Centaur II / Stereo Power Amplifier
Centaur II / Stereo Power Amplifier / Features

Centaur II Power Amplifier
Perfectly balanced circuitry
Centaur II uses the same balanced bridged circuit topology found in all Constellation Audio amplifiers. The fully complementary design uses separate amplifiers for the positive and negative halves of the signal, ensuring the lowest possible noise and the best possible frequency response.

Other complementary designs use different types of transistors to amplify the positive and negative halves of the incoming audio, resulting in an imbalanced signal. Centaur II instead uses only N-type output transistors. Along with other circuit refinements, the all-N-type design results in an essentially perfect signal balance – and fidelity exceeded only by our own Hercules II amplifers.

Such perfect balance in an amplifier benefits the listener only if the incoming signal is perfectly balanced. To this end, Centaur II's input stage is the same Line Stage Gain Module found in the Virgo preamp. Like the rest of the amplifier, this stage is fully complementary, with separate circuits for positive and negative halves of the signal. By using hand-selected, low-noise FETs and servo circuits, the Line Stage Gain Module brings any incoming signal into essentially perfect positive/negative balance. Customers who own Constellation Audio preamps may use the Constellation Link interface to bypass the Centaur II's gain module.

Centaur II Interior with Heat Sinks

Seemingly endless power
Centaur II's incomparable audio circuitry would achieve little without a clean, abundant source of power. This is why we used a 1,600-watt, custom-wound toroidal transformer with separate windings for the left and right channels. Each channel effectively has its own source of power, so high demands on one do not affect the other. Fully regulated supplies for all line-level circuits eliminate interference from outside sources.

The power supply's ample current allows Centaur II to drive any speaker, even the most exotic full-range models. The 250-watt-per-channel rating at 8 ohms doubles to 500 watts at 4 ohms. At 2 ohms, an impedance few amplifiers can handle, Centaur II delivers a staggering 800 watts per channel. Even at such high output levels, the modular amplifier design is inherently stable; unlike many amplifiers, it does not need a Zobel network at the output to damp high frequencies.

Thanks to the new deep-fin heat sinks and the air flow provided by hundreds of large ventilation holes in the sides of the chassis, Centaur II runs cool, placing minimum stress on its output transistors and driver circuits. Push it as hard as you like and it answers with impeccable fidelity no matter how demanding the speakers, the program material or the volume.

A substantial refinement to an extraordinary amp
Centaur II's greatly expanded power supply capacitance and heat sink capacity take our revolutionary amplifier technologies to even greater heights. Centaur II builds on the original Centaur's signature blend of musicality and muscle with improved deep bass performance; the greater detail and smoother textures of extended Class A operation; and dynamics that are, quite literally, staggering. No matter what you expect from a stereo amplifier, Centaur II can deliver far more.

Performance Series Index
Argo Integrated Amplifier
Virgo III Line Stage
Cygnus Digital File Player/DAC
Perseus Phono Preamplifier
Centaur II Mono Power Amplifier
Centaur II Stereo Power Amplifier
Centaur Mono Monoblock Power Amplifier
Centaur Stereo Power Amplifier

Inspiration Series Index
Preamp 1.0 Line Stage
Stereo 1.0 Stereo Power Amplifier
Mono 1.0 Monoblock Power Amplifier

Reference Series Index
Altair II Line Stage
Orion Phono Stage
Hercules II Mono Power Amplifier
Hercules II Stereo Power Amplifier

Contact Us | Performance Series | Reference Series | Inspiration Series | Partners | Downloads | About Us | Events
© 2008-2017 Constellation Audio, Inc. All Rights Reserved.